Weschler Instruments – Manufacturer & distributor of measurement & control equipment
440.238.2550   /   800.557.0064   /   
analog meters, digital meters, transducers, signal conditioners, data loggers and test instrumentation
Home | About Us | What's New | Industries | Weschler Products | All Products | Meter Mod Center | Reference | Contact | Site
Search Catalog 
      GO   
 All Categories    Repeat Cycle Timer - ATC
Weschler Instruments is a manufacturer and distributor of electrical and electronic measurement equipment. Customers worldwide use our products in power plants, steel mills, chemical plants, paper mills and other industrial applications that require rugged, reliable and accurate instrumentation.
All Categories > Digital Meters > ATC Digital Timers > Repeat Cycle Timer - ATC > Item # CS100  
    Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Request Information

Item # CS100, Repeat Cycle Timer



Repeat Cycle Timer

larger image
  • Selectable T1 & T2 Times
  • Simple Front Panel Setup
  • Rugged, SPDT Solid-state Relay Outputs
  • Reset Input Synchronizes Multiple Units
  • Standard 15 Terminal Plug-In Round Case
  • Panel Mounts in Switchboard Housing or 3.19" Cutout
  • Easily Replaces Round Case Eagle Timers
The CS100 is a simple repeat cycle timer with T1 and T2 timers up to 25 seconds each, plus a third timer (T3) that extends the T1 time to a maximum of 50 seconds. The four front panel pushbuttons provide easy access to timer settings. A Reset input on the back of the unit allows multiple units to be synchronized.

The four SSR (Solid State Relay) outputs are configured as three SPDT (Single Pole Double Throw) and one SPST (Single Pole Single Throw). Relay outputs and control voltage initiate times have a maximum reset time of approximately 10 milliseconds.

The CS100 has a standard 15 terminal, plug-in round case, which is designed to minimize down time during replacement. The CS100 is quickly & easily removed from the front. A replacement timer can be plugged into the existing housing, eliminating the need for rewiring. The CS100 can also be panel mounted in a 3.19" round cutout.





Specifications

Timing Ranges

T1 = 0.1 - 25 sec
T2 = 0 - 24 sec
T3 = 0-25 sec

Timing Modes

Repeat Cycle

Time Setting

Front Panel Pushbuttons

Time Repeat Accuracy

± 0.005 s

Display

Red LED, 2 Digit

Relay Outputs

4 Solid state relays

Relay Contacts

Three SPDT (form C), one SPST (form A)

Contact Rating

4 A at 130 VAC, zero-crossing

Off-State Leakage Current

0.1 mA at maximum voltage

Reset Time

10 ms

Operating Temperature Rating

32 to 122 ºF
0 to 50 ºC

Power

100-132 VAC,50/60 Hz.

Power Consumption

2.4VA

Transient Voltage Protection

Metal Oxide Varistor

NEMA Rating

NEMA 12

Terminals

Screw Terminals

Mounting

Plug-in Case

Dimensions (dia x long barrel)

3.07 x 4.1 in

Dimensions (W x H x D bezel)

3.15 x 4.72 x 2.2 in


 DOWNLOADS 

 width= Repeat Cycle Timer Catalog Page
(PDF, 232KB)


Request Information